Bypass Tray
Paper types
Plain Paper, Middle Thick, Thick Paper 1, Thick Paper 2, Thick Paper
3, Thin Paper, Letterhead, Label Paper, Coated Paper (Glossy),
Coated Paper(Glossy:Thick), Coated Paper (Matted), Coated Paper
(Matted:Thick), Cardstock, Special Paper 1, Special Paper 2, Special
Paper 3, Bond Paper, Preprinted Paper, Color Paper, Recycled Paper,
Envelope
Paper sizes requiring manual
settings
The following sizes are supported, but they must be selected using the
control panel. For details about paper size settings, see "Specifying
standard size paper for bypass tray".
A4 , A5 , A6 , B5 JIS , B6 JIS , 8
1
/
2
" × 14 " (Legal) , 8
1
/
2
" × 13 " (Foolscap) , 8
1
/
2
" × 11 " (Letter) , 8
1
/
4
" × 13 " (Folio)
, 8 " × 13 " (F/GL) , 7
1
/
4
" × 10
1
/
2
" (Executive) , 5
1
/
2
" × 8
1
/
2
" (Half Letter) , 4
1
/
8
" × 9
1
/
2
" (Com 10) , 3
7
/
8
" × 7
1
/
2
" (Monarch) , C5 Env. , C6 Env. , DL Env. ,16K , Custom Size
Custom paper size
The following custom sizes are supported, but they must be selected
using the control panel. For details about custom size paper settings,
see " Specifying custom size paper for the bypass tray".
• Approximately 64 - 216 mm (2.52 - 8.50 inches) in width
• Approximately 125 - 1260 mm (4.93 - 49.60 inches) in length
Paper weight 60 to 220 g/m
2
(16 to 59 lb.)
Paper capacity
100 sheets (80 g/m
2
, 20 lb.)
Do not load the paper so that the top of the stack exceeds the paper
guides on the bypass tray.
• When printing on custom size paper that has a width of 89 mm or less, use paper that is no more than
210 mm in length.
• Duplex printing on paper that is longer than 297 mm will be slower than duplex printing on paper
that is shorter.
• p.134 "Specifying standard size paper for the bypass tray"
• p.135 "Specifying custom size paper for the bypass tray"
Supported Paper for Each Tray
107
To Next Page
Loading...
Need help?
General
