EasyManuals Logo

Ricoh Aficio SP C320DN User Manual

Ricoh Aficio SP C320DN
260 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #101 background imageLoading...
Page #101 background image
5. Enter appropriate "Common Name" and "Country Code" on "Certificate Information" page,
and then click [OK].
6. "Updating..." appears. Wait for about 2 minutes, and then click [OK].
7. Click [Details], shown in the "Device Certificate" window as the memo pad icon for
"Requesting".
8. Select all, and then copy the entire "Text for Requested Certificate" text that is displayed in
the "Certificate Status" window.
9. Access the certificate authority server, and then obtain the CA signified certificate using the
text copied into "Text for Requested Certificate" windows.
Obtaining the certificate differs depending on the environment you want to use.
10. Click [Certificate 2] on "Device Certificate" window, and then click [Install].
11. Using a text editor, open the CA signified certificate downloaded in step 11, and then copy
over all the text.
12. In the [Enter Certificate Request] window, paste all the text copied into the CA signified
certificate.
13. Click [OK].
14. "Updating..." appears. Wait for about one or two minutes, and then click [OK].
15. Check that the "Device Certificate" shows "Installed".
16. Click [Certificate 2] on "Certification", and then click [OK].
17. Click [Logout].
18. Quit Web Image Monitor.
If you request two certificates simultaneously, the certificate authority might not display either
certificate. Click [Cancel Request] to cancel the request.
You can select [Certificate 1-4] in the "Device Certificate" window. Note that if you select [Certificate
1] in the "Device Certificate" window, you must select "Certificate 1" in the "IEEE 802.1X" drop down
menu in the "Certification" window.
Click [Cancel Request] to cancel the request for the server certificate.
If "Not found" appears after clicking [OK] in steps 6 and 14, wait one or two minutes, and then click
[Refresh].
Enabling SSL
After installing the device certificate in the machine, enable the SSL setting.
This procedure is used for a self-signed certificate or a certificate issued by a certificate authority.
Configuring IEEE 802.1X
99
5

Table of Contents

Other manuals for Ricoh Aficio SP C320DN

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Ricoh Aficio SP C320DN and is the answer not in the manual?

Ricoh Aficio SP C320DN Specifications

General IconGeneral
Print TechnologyLaser
Duplex PrintingYes
Processor400 MHz
Supported Operating SystemsWindows, Mac OS, Linux
Resolution1200 x 1200 dpi
ConnectivityUSB 2.0, Ethernet
Memory128 MB (expandable to 640 MB)
Dimensions400 x 428 x 368 mm
Print SpeedUp to 26 ppm
Monthly Duty CycleUp to 50, 000 pages

Related product manuals