Ricoh Aficio SP C320DN

4. Setting value
The value displayed is the one currently set when the gradation correction sheet is printed. This value
corresponds to the value set on the control panel.
Resetting the Gradation Correction Value to the Initial Value
Reset the correction value default.
1. Press the [Menu] key.
CBK049
2. Press the [ ] or [ ] key to select [Maintenance], and then press the [OK] key.
3. Press the [ ] or [ ] key to select [Quality Maintenance], and then press the [OK] key.
4. Press the [ ] or [ ] key to select [Color Calibration], and then press the [OK] key.
Correcting the Color Gradation
195
8