1. Press the [Menu] key.
2. Press the [ ] or [ ] key to select [Paper Input], and then press the [OK] key.
3. Press the [ ] or [ ] key to select [Paper Size: Tray 2], and then press the [OK] key.
4. Select [Custom Size] using the scroll keys, and then press the [OK] key.
5. Press the [ ] or [ ] key to enter the horizontal value, and then press the [OK] key.
If you press and hold the key, the value increases/decreases by 1 or 10 mm.
5. Paper and Other Media
102
To Next Page
Loading...
