12. Lower the handle located on the front of the photo conductor unit, and push it until it clicks
into place.
13. Holding the photo conductor unit firmly in place, pull out the tape.
• Remember to pull out the tape. Malfunctions occur if you attempt to print while the tape is still
attached.
• The removed tape is dirty. Be careful not to let it touch your hands or clothes.
14. When replacing a color photo conductor unit, replace the other two color units together
using the same procedure, before closing the inner cover.
15. Pressing both sides, firmly close the inner cover.
6. Replacing Consumables
122
To Next Page
Loading...
