Ricoh Aficio SP C830DN User Manual

Message Cause Solution
"Insufficient Memory" A memory allocation error
occurred.
PCL 5/PostScript 3
Select a lower resolution on the
printer driver. For details about
how to change the resolution
setting, see the printer driver Help.
PCL 6
Select a lower resolution on the
printer driver. For details about
how to change the resolution
setting, see the printer driver Help.
On the printer driver's [Detailed
Settings] tab, click [Print Quality]
in "Menu:", and then select
[Raster] in the "Vector/Raster:" list.
In some cases, it will take a long
time to complete a print job.
• Install the optional SDRAM
module. For details about
installing SDRAM module, see
"Installing the SDRAM module",
Operating Instructions.
"Memory Retrieval Error" A memory allocation error
occurred.
Turn the main power switch off and then
back on again. If the message appears
again, install or replace the RAM. For
details about installing SDRAM
module, see "Installing the SDRAM
module", Operating Instructions.
"No response from the
server. Authentication has
failed."
A timeout occurred while
connecting to the server for
LDAP Authentication or
Windows Authentication.
Check the status of the server.
"Output tray has been
changed."
The output tray was
changed because the paper
size of the specified output
tray is limited.
Specify the proper output tray.
When Messages Are Displayed
101

Ricoh Aficio SP C830DN Specifications