Messages during Direct print from a memory storage device
Message Causes Solutions
"99: Error" This data cannot be printed.
The specified data is either
corrupt or not supported by
the Direct printing function
from memory storage
devices.
Check that the data is valid. For details
about the kinds of data supported by
the Direct printing function from
memory storage devices, see "Direct
Printing from a Memory Storage
Device", Operating Instructions.
If printing does not start, contact your service representative.
• The contents of errors may be printed on the Configuration Page. Check the Configuration Page in
conjunction with the error log. For details about how to print the Configuration Page, see "Test
Printing", Operating Instructions.
3. Troubleshooting
104
To Next Page
Loading...
