Before You Begin
1. Unpack the Folder FD6500A (Fan Fold Unit) (B889)
• The fan fold unit weighs 145 kg (319 lb.) and requires two service technicians to move it and
install it safely.
• Before installing the fan fold unit, switch off the main machine and disconnect its power cord
from the main power source.
• Do not reconnect the main machine and switch it on until after the fan fold unit installation has
been completed.
2. Check the accessories and their quantities against the table below.
No. Description Qty Comment
1 Operating Instructions Holder 1
2 Connector Harness 1
3 Joint Brackets 2 Not used: D046/D049
4 Lock Plate: Right 1
5 Lock Plate: Left 1
6 Shoes 4
7. Decal 1
8. Guide Mylar 1
9 Pin 2
10. Folder Positioning Bracket: Lower 2
11. Folder Positioning Bracket: Upper 2 Not used: D046/D049
12. Rear Copy Tray 3
13. Screw (M4x8) 8 For items 3, 4, 5
14. Screw (M3x6) 15 For items 2, 10, 11, 16
15. Operating Instructions 1
16. Upper Guide Mylars 2 Not used: D046/D049
Bridge Unit BU6500 (D407) Folder FD6500A (B889)
105
To Next Page
Loading...
