Scanner SP Tables
1001 Scan NV Version GW
This SP displays the current version of the scanner firmware in NVRAM. It is a 9-digit display,
for example: S_BLG1_03 where:
• S: Function name: "Scanner"
• BLG1: Machine name: Beluga-C1
• 03: Update number: 3rd Version
1004 Compression Type GW
Selects the compression type for binary picture processing when the original is scanned in the
following modes: Text, Text/Photo, Photo. These modes are selected on the operation panel
before the original is scanned.
[1 to 3/3/1]
1: MH, 2:MR, 3: MMR
1005 Erase Margin (Remote Scan) GW
Creates an erase margin at each of the four edges of the scanned image if the original has
been scanned edge-to-edge with no margin.
[0 to 5/0/1 mm]
1008 Program Registration GW
Displays the number of user programs registered for the current scanner application.
[0 to 10/0/1]
1009 Remote Scan Disable GW
This SP is a scanner application function. It determines whether a network TWAIN scanner
application can be used.
[0 to 10/0/1]
0: Enable. TWAIN application can be used.
1: Disable. TWAIN application cannot be used.
1011 Org Count Disp GW
Scanner SP Tables
273
To Next Page
Loading...
