1. Remove:
[1] Right copy tray (x2)
[2] Left copy tray (x2)
• To avoid damaging the pawls on the bottom of the covers, hold the cover level when you pull it
straight out.
[3] VDB (x4, FFC x6, x4, Ground x)
NVRAM
To Upload NVRAM to an SD Card
1. Enter the SP mode and do SP5990-2 to print an SMC report.
2. Turn the machine off.
3. Insert the SD card in Slot 1.
4. Turn the machine on.
5. Enter the SP mode and do SP5824.
6. Touch [OK] on the operation panel to start the upload.
7. Data uploaded from NVRAM is stored in the NVRAM folder on the card.
4. Replacement and Adjustment
382
To Next Page
Loading...
