Type Mode Step Input Value [Range/Default/Step]
152 2 [a]+[b]
D046: [0 to 5000/200/1]
D049: [0 to 5000/750/1]
153 3 [a]+[b]+[c]
D046: [0 to 5000/300/1]
D049: [0 to 5000/750/1]
1955 Transport Fan Duty Setting DFU
1
Very Thin Paper
Selects the transport fan rotation speed for Japanese chemical paper.
The suction created by the transport motor below the paper feed path keeps the paper straight.
The force of this suction could be too great for extremely thin paper.
[0 to 100/0/10 %]
2
Stand-by Condition
Selects the transport fan rotation speed for stand-by mode.
[0 to 100/100/10%]
SP2000 Drum
2001 Charge Corona Adjustment DFU
1 Total Corona Current
Adjusts the charge corona output.
[650 to 1530/1250/10 uA]
2 Grid Voltage: Image Area
Adjusts the charge grid output.
[160 to 1080/800/10V]
3 Grid Voltage: ID Sensor Pattern
Adjusts the charge grid output for the ID sensor pattern.
[160 to 1080/650/10V]
2101 Printing Erase Margin
SP2946 must be "On", or these settings will be ignored.
1 Leading Edge
Adjusts the printing margin.
[0 to 10/2/0.1 mm]
System Service Mode
117
To Next Page
Loading...
