Ricoh BE-C1 D046 - 2 Nd;4 Th Feed Roller and Clutch; Registration Roller

2nd/4th Feed Roller and Clutch
Preparation
• Remove the roll tray. * p.326
1. Remove:
[1] Bushings ( x 2)
[2] Second feed roller ( x 1)
[3] Paper feed clutch ( x 1, clamps x 2)
2. After replacement, do these SP codes for the roller which you replaced, to adjust the cut length.
SP1920-021 - 253 Cut Length Adjustment
Registration Roller
Preparation
1. Raise the upper unit.
2. On the left, remove:
• Upper unit left cover p.262
• Left front cover * p.260
4. Replacement and Adjustment
330
4