Ricoh BE-C1 D046 - Interface PCB Type W7140 (D445)

10. Attach the cable [A] to the connector.
11. Attach the Cap – LAN connector [B] to the standard LAN connector.
Interface PCB Type W7140 (D445)
• The Interface PCB Type W 7140 (D455) is required for the Printer Controller Type RW-7140 (D399).
Accessories
Check the accessories and their quantities against the table below.
No. Description Qt'y
1. Interface PCB 1
2. Screws 3
3. Protector Plate 1
4. Cable 1
5. Ferrite Cores 2
2. Installation
214
2