IEEE 802.11a/g Interface Unit Type J/K (D377-01, -02, -19)
Accessories
Check the accessories and their quantities against this list.
Description Qty
1. Wireless LAN PCB (GW-WLAN) 1
2. Card (GW-WLAN) 1
3. Wireless LAN Instructions 1
Installation
1. Remove the cover of Slot B ( x 2).
2. Touch a metal surface to discharge any static electricity from your hands.
3. Insert the interface board in Slot B.
4. Confirm that the board is inserted completely, tighten the board screws [1] with your fingers (do not
use a screwdriver).
5. Fasten the cable connector [2] ( x 2).
6. Separate the antenna cables so they are not tangled.
MFP Options
197
To Next Page
Loading...
