0: Multi-rate gamma conversion module
1: Main scan fine adjust/simple magnification module
2: Density gamma module
3: Gradation processing (M-to-P) module
4: Reserved
5: Reserved
6: Reserved
7: Reserved
SP5000 Mode
5024 mm/inch Display Selection GW
Selects the unit. Press mm or inch.
0: Metric, 1: Inch
5045
Accounting Counter GW
Sets the method of accounting for machine usage.
1 Japan Only
2
Selects the unit for the counter (m, ft, yards, m2, ft2, or yd2)
0: metres
1: yards
2: feet
3: m2
4: yards2
5: feet2
6: A3 area = 1 unit
7: 0.1 metre (key counter only)
8: 0.1 yard (key counter only)
5055 Display IP Address GW
Switches the IP address display on the operation panel on/off.
OFF: IP address not displayed on operation panel
ON: IP address displayed on operation panel.
System Service Mode
151
To Next Page
Loading...
