1 1st Cutter
[0 to 9 9999 9999/1/1 cut]
Target service life: 120,000 cuts
2 2nd Cutter
SP8000: Data Log2
Many of these counters are provided for features that are currently not available, such as sending color
faxes, and so on. However, here are some Group 8 codes that when used in combination with others, can
provide useful information.
SP Numbers What They Do
SP8211 to SP8216 The number of pages scanned to the document server.
SP8401 to SP8406 The number of pages printed from the document server
SP8691 to SP8696 The number of pages sent from the document server
Specifically, the following questions can be answered:
• How is the document server actually being used?
• What application is using the document server most frequently?
• What data in the document server is being reused?
Most of the SPs in this group are prefixed with a letter that indicates the mode of operation (the mode of
operation is referred to as an ‘application’). Before reading the Group 8 Service Table, make sure that
you understand what these prefixes mean.
T: Total: (Grand Total).
Grand total of the items counted for all applications
(C, F, P, etc.)..
C: Copy application.
Totals (pages, jobs, etc.) executed for each
application when the job was not stored on the
document server.
P: Print application.
S: Scan application.
L: Local storage (document server)
Totals (jobs, pages, etc.) for the document server. The
L: counters work differently case by case. Sometimes,
they count jobs/pages stored on the document
server; this can be in document server mode (from the
document server window), or from another mode,
such as from a printer driver or by pressing the Store
System Service Mode
237
To Next Page
Loading...
