Thermostats
1. Remove the fusing unit. * p.345
2. Remove:
[1] Cover
[2] Bracket
• Note the correct arrangement of the harness wires at [2]. They must be reattached in the same
way. If they are not reattached correctly, this will cause a SC code for a fusing unit error.
3. Pull apart the thermostat assembly [1] to remove the thermostat [2].
If you are replacing a thermostat:
• Use only thermostats rated for use with this machine.
• The thermostats may have different numbers. This means they are taken from different lots.
4. Replacement and Adjustment
354
To Next Page
Loading...
