• If the customer intends to use the Printer Controller Type RW-7140, the GW controller scanner
option can be used and does not need to be removed from the main machine.
• If the GW printer option has been moved to the scanner SD card, be sure to remove the printer
option from this SD card.
13. Reassemble the machine.
IEEE 1284 Interface Board Type A (B679-17) (Centronics)
Accessories
Description Qty
1. IEEE1284 Interface Board B679 1
Installation
1. Remove the cover of Slot A ( x 2).
2. Touch a metal surface to discharge any static electricity from your hands.
3. Install the interface board in Slot A ( x 2).
4. Cycle the machine power off and on.
5. Do SP5990 to print an SMC Report.
6. Check the report to confirm that the interface board is installed correctly (the Centronics option should
appear in the report).
2. Installation
196
To Next Page
Loading...
