33. Attach [A] to the base of each rear copy tray support [B].
34. Attach the I/F cables of the fan fold unit [A] to the cross fold unit [B] and the main machine [C].
Power On
The fan fold unit must be switched on before the main machine.
1. Switch on the fan fold unit.
2. Switch on the main machine.
• The fan fold unit must be switched on first, so that the main machine will recognize the fan fold unit
after the main machine is powered on and starts its initialization procedure.
Folder FD6500B (Cross Folder) (B890)
181
To Next Page
Loading...
