• Left inner cover * p.262
• Registration motor * p.316
• Registration clutch * p.318
3. On the right, remove:
• Upper unit right cover * p.262
• Right front cover * p.259
• Right inner cover * p.260
• T/S power pack * p.380
4. At the front, remove the bypass feed table.
Torque Limiter
1. On the right side, remove the torque limiter bracket [1] (x2).
2. Remove the torque limiter [1] from the right end of the roller (x1).
Paper Feed, Cutting
331
To Next Page
Loading...
