This SP determines whether the total for the number of scanned originals is displayed on the
operation panel.
[0 to 1/0/1]
0: OFF. Total not displayed
1: ON. Total displayed.
1012 User Info Release GW
This SP determines whether user information is released at the end of every job.
[0 to 1/1/1]
0: OFF. Do not release
1: ON. Release the following details:
• Destination (Email/Folder/CS
• Sender name
• Mail text
• Subject
• File name
1020 Signature Setting (Scan-to-Email) GW
This SP determines whether the sender signature is allowed for scan-to-email sending.
[0 to 2/0/1]
0: Allows setting for each job. Operator selects before sending.
1: Always allowed. Signature required before sending.
2: OFF. Never allowed.
2021 Compression Level (Grayscale) GW
Sets the rate of compression for JPG files that are sent to another destination with a software
application. There are five settings. Each setting below corresponds to the notches selected
for compression level with User Tools:
1.[User Tools]> "Scanner Features"> "Send Settings"> Compression (Grayscale/Full Color).
2. Touch "Low" to move the notch selection (highlight) left for lower compression.
-or-
Touch "High" to move the notch selection right for higher compression.
8. Appendix: SP Mode Tables
274
To Next Page
Loading...
