9. On the operation panel, remove the dummy keytop and replace it with the "Other Functions" keytop.
10. Reconnect the network cable.
11. Turn the main power switch on.
12. Do SP5878-1 and push [Execute] to enable the Data Overwrite Security option.
13. Go out of the SP mode.
14. Cycle the machine off/on.
15. Do SP5990-5 to print the Self Diagnosis Test.
16. Make sure the ROM number and firmware version in area [a] of the diagnostic report are the same
as those in area [b]:
• Area [a]: “ROM Number/Firmware Version” – “HDD Format Option”
• Area [b]: “Loading Program” - “GW4a_zoffyx”
Check Operation of the DOS Application
1. Turn "Auto Erase Memory Setting" on:
[User Tools]> "System Settings"> "Administrator Tools"> "Auto Erase Memory Setting"> "On"
2. Exit User Tools.
2. Installation
206
To Next Page
Loading...
