1. Install the main machine. * p.27
2. Install the roll feeder * p.47
-or-
Paper cassette. * p.64
3. Install the MFP options. * p.186
4. Remove the tapes and shipping materials from the Fan Fold Unit (B890-17, -27). * p.152
• The manual feeder and bridge unit are pre-installed on the fan fold unit.
5. Dock the fan fold unit to the back of the main machine.
6. Remove the tapes and shipping materials from the Cross Fold Unit (B890-57) (transport unit and cross
fold unit). * p.152
7. Connect the transport unit [1] and cross fold unit [2].
1. Dock the assembled cross fold unit (B890-57) to the fan fold unit (B890-17, -27).
2. Installation
26
To Next Page
Loading...
