4010 Scanner Sub Scan Registration
1
Leading Edge
Fine adjusts the time between the sensor-on position and the leading edge of the image.
[-10 to +10/0/0.1 mm]
2
Trailing Edge
Fine adjusts the time between the sensor-off position and the trailing edge of the image. This
determines the timing for the CIS to stop reading the image after the original has passed the
registration sensor.
[-10 to +10/0/0.1 mm]
4011 Scanner Main Scan Registration
Adjusts the scan registration.
[-4 to +4/0/0.1 mm]
4012 Scanner Erase Margin
Adjusts the non-scanning area.
5 DF: Leading Edge
[0.0 to +9.0/1.5/0.1 mm]6 DF: Trailing Edge
7 DF: Left
8 DF: Right [0.0 to +9.0/0.5/0.1 mm]
4013
Scanner Free Run
This SP sets up the free run operation.
1 Start
To start the free run, touch [On].
To end the free run, touch [Off].
The free run simulates scanning pages of length determined by SP4013 003, with the interval
between each page determined by SP4013 002.
2 Page Interval Setting
8. Appendix: SP Mode Tables
136
To Next Page
Loading...
