2: Expansion Device 2
3: Expansion Device 3
5114
Optional Counter I/F Japan Only GW
This SP enables the I/F connection for the MF key card.
5118
Disable Copying GW
Temporarily denies access to the machine.
0: Release for normal operation
1: Prohibit access to machine
5120
Mode Clear Opt. Counter Removal GW
Do not change.
0: Yes. Normal reset
1: Standby. Resets before job start/after completion
2: No. Normally no reset
5121
Counter Up Timing GW
Determines whether the optional counter counts up at paper feed-in or at paper exit.
0: Feed count
1: No feed count
5127
APS OFF Mode GW
This SP can be used to switch APS (Auto Paper Select) off when a coin lock or pre-paid key
card device is connected to the machine.
0: On
1: Off
5162
App. Switch Method GW
Controls if the application screen is changed with a hardware switch or a software switch.
0: Soft Key Set
1: Hard Key Set
System Service Mode
153
To Next Page
Loading...
