5413 Lockout Setting GW
1
Lockout On/Off
Switches on/off the lock on the local address book account.
[0 to 1/b/1]
0: Off
1: On
2
Lockout Threshold
Sets a limit on the frequency of lockouts for account lockouts.
[1 to 10/b/1]
3
Cancellation On/Off
Determines whether the system waits the prescribed time for input of a correct user ID and
password after an account lockout has occurred.
[0 to 1/0/1]
0: Off (no wait time, lockout not cancelled)
1: On (system waits, cancels lockout if correct user ID and password are entered.
4
Cancellation Time
Determines the length of time that the system waits for correct input of the user ID and
password after a lockout has occurred. This setting is used only if SP5413-3 is set to "1" (on).
[1 to 999/60/1 min.]
5 Counter Clear Time (Not available)
5414 Access Mitigation GW
1
Mitigation On/Off
Switches on/off masking of continuously used IDs and passwords that are identical.
[0 to 1/0/1]
0: Off
1: On
2
Mitigation Time
Sets the length of time for excluding continuous access for identical user IDs and passwords.
[0 to 60/15/1 min.]
System Service Mode
157
To Next Page
Loading...
