Stores jam errors.
0: OFF 1: ON
5859
Debug Log Save Function GW
These SPs allow you to set up to 10 keys for log files for functions that use common memory
on the controller board.
[-9999999 to 9999999/1]
001 to 010 Key 1 to 10
5860 SMTP/IMAP4 GW
20 Partial Mail Receive Timeout
[1 to 168/1]
Sets the amount of time to wait before saving a mail that breaks up during reception. The
received mail is discarded if the remaining portion of the mail is not received during this
prescribed time.
21 MDN Response RFC2298 Compliance
Determines whether RFC2298 compliance is switched on for MDN reply mail.
0: No
1: Yes
22 SMTP Auth. From Field Replacement
Determines whether the FROM item of the mail header is switched to the validated account
after the SMTP server is validated.
0: No. "From” item not switched.
1: Yes. "From” item switched.
25 SMTP Auth Direct Sending
Occasionally SMTP fails to be recognized. If this occurs use this SP to force manual
recognition.
26 S/MIVE: MIME Header Setting
Selects the MIME header type of an E-mail sent by S/MIME.
[0 to 2 / 0 / 1]
0: Microsoft Outlook Express standard
8. Appendix: SP Mode Tables
196
To Next Page
Loading...
