14 Door 2: Cross Folder
Bit Input Status
7 Not used ---
6 Not used ---
5 Not used ---
4 Transport JG door microswitch (F) 0: Close, 1: Open
3 Cross horizontal microswitch 1 0: Close, 1: Open
2 Cross horizontal microswitch 2 0: Close, 1: Open
1 Inverter door microswitch 0: Close, 1: Open
0 Inverter door microswitch 0: Close, 1: Open
15 --- Stamp Japan Only ---
6118 Folder Output Check
Use this SP to switch on the motors, clutches, and solenoids of the Folder unit B889 to test their
operation.
Important: After switching on a motor, clutch, or solenoid, be sure to switch it off after you finish
your work.
1 Transport Motor: Fwd: Fan Folder
2 Bypass Feed Clutch: Fan Folder
3 Paper Entrance Clutch: Fan Folder
4 Output Junction Gate SOL: Fan Folder
5 Pre-Fold Motor: SE: Fwd: Fan Folder
6 Pre-Fold Motor: LE Fwd: Fan Folder
7 Pre-Fold Clutch: SE: Fan Folder
8 Pre-Fold Clutch: LE: Fan Folder
9 Relay Clutch: Fan Folder
10 Corner Fold Exit Clutch: Fan Folder
8. Appendix: SP Mode Tables
206
To Next Page
Loading...
