Ricoh GR Digital II - Inserting the Date into a Still Image (Date Imprint)

119
Various Shooting Functions
1
You can insert the date (YY/MM/DD) or the date and time (YY/MM/
DD hh:mm) at the lower right of a still image.
1 Turn the mode dial to 5/P/A/M/SCENE.
2 Press the MENU/OK button.
• The shooting menu is displayed.
3 Press the " button to select [Date Imprint] and press
the $ button.
4 Press the !" buttons to select
[Date] or [Time].
5 Press the MENU/OK button, or
press the # button and then
the MENU/OK button.
• The symbol appears on the screen.
Note ----------------------------------------------------------------------------------------------
• If the date and time have not been set, [Date Imprint] cannot be used. First make the
date and time settings. (GP.188)
• [Date Imprint] cannot be used with movies.
• When shooting in RAW mode, the date cannot be imprinted on the DNG file. The date
is added to the JPEG file recorded at the same time as the DNG file.
• The date imprinted in an image cannot be deleted.
Inserting the Date into a Still Image
(Date Imprint)