124
Various Shooting Functions
1
1
Turn the mode dial to 5/P/A/M/SCENE, and press the
ADJ. lever.
2
Press the ADJ. lever, or press the #$ buttons until the
white balance menu appears.
3
Press the !" buttons to select
[M].
4
Point the camera at a piece of
paper or something white
under the lighting conditions
for your picture.
5
Press the DISP. button.
• The white balance is set.
6
Press the MENU/OK button.
• The symbol appears on the screen.
• The screen is displayed with the white
balance set in Step 5. If the result is
not as expected, repeat Steps 4 and 5
to change the settings as many times
as required.
Note ----------------------------------------------------------------------------------------------
To cancel [Manual Settings], select a setting other than [M] in Step 3.
Setting the White Balance Manually
(Manual Settings)
Manual Settings:
OkNext Item
Set
To Next Page
Loading...
