163
Changing Camera Settings
5
You can change the upper limit of the ISO setting for [Auto-Hi] (Auto
high sensitivity) (GP.126) in [ISO Setting] on the shooting menu.
To change the auto high sensitivity setting, follow the steps below.
1
Display the setup menu.
• For the operating procedure, see P.156.
2
Press the " button to select [ISO Auto-High] and press
the $ button.
3
Press the !" buttons to select
the desired setting.
4
Press the MENU/OK button, or
press the # button and then
the MENU/OK button.
Note ----------------------------------------------------------------------------------------------
Images shot with a higher sensitivity may appear grainy.
Changing the ISO Auto-High Setting
(ISO Auto-High)
Available Settings
AUTO 200
AUTO 400 *Default setting
AUTO 800
AUTO1600
To Next Page
Loading...
