Ricoh GR Digital II - Using the Shutter Release Button to Set a Setting in ADJ. Mode (ADJ Shutter)

167
Changing Camera Settings
5
In ADJ. mode (GP.64), you usually press the MENU/OK button or
the ADJ. lever to set a setting.
When [ADJ Shutter] is set to [On], you can also set a setting by half-
pressing the shutter release button.
To change the shutter release button setting, follow the steps
below.
1 Display the setup menu.
• For the operating procedure, see P.156.
2 Press the " button to select [ADJ Shutter] and press
the $ button.
3 Press the !" buttons to select
[On].
4 Press the MENU/OK button, or
press the # button and then
the MENU/OK button.
Using the Shutter Release Button to
Set a Setting in ADJ. Mode (ADJ
Shutter)
Available Settings Description
On Press the ADJ. lever, the MENU/OK button, or half-press the
shutter release button to set the setting.
Off *Default setting Press the ADJ. lever or the MENU/OK button to set the setting.