EasyManua.ls Logo

Ricoh GR Digital II - Using the External Flash

Ricoh GR Digital II
242 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
227
7
Appendices
The camera has a hot shoe, allowing you
to attach an external flash (available in
stores).
The following external flashes are recommended for use with this
camera.
Using a recommended flash
1
Close the flash cover (GP.18).
2
With the camera and external flash powered off, attach
the external flash to the hot shoe.
3
Turn on the external flash.
4
Turn on the camera.
The external flash symbol appears on the picture display.
Note ----------------------------------------------------------------------------------------------
The internal flash will not fire while the external flash symbol appears on the picture
display.
If the external flash is not recognized, turn off the flash and the camera, and then
remove and reattach the external flash.
Using the External Flash
Distributor Item Model
Sigma EF-530 DG SUPER SA-STTL
Sigma EF-530 DG ST SA-STTL
Hot shoe

Table of Contents

Other manuals for Ricoh GR Digital II

Related product manuals