50
If you are using the camera for the first time, read this section.
• The screen changes to three-
frame view. The large frame at the
center of the screen displays the
currently selected still image.
•Press the ! button to display the
still image 10 frames backward. If
there are less than 10 still images,
the first still image is displayed.
•Press the " button to display the still image 10 frames forward.
If there are less than 10 still images, the last still image is
displayed.
3
Press the 9 button again
during three-frame view.
• The screen is divided into 12
frames and thumbnails are
displayed (List).
Switching to Single-Picture Display
In three-frame view
1
Press the #$ buttons to select a still image.
2
Press the 8 (Enlarged View) button or the MENU/
OK button.
In list
1
Press the !"#$ buttons to select a still image.
2
Press the 8 button twice.
Note ---------------------------------------------------------------------------------------------------
If any of the following operations is performed in the three-frame view, the display
returns to the ordinary playback screen (single-picture display) and the operation is
executed.
• Deletion (GP.52)
• Menu display (GP.133)
• Movie playback (GP.132)
Selected still image
To Next Page
Loading...
