If you are using the camera for the first time, read this section.
55
Specifying a Range of Files to be Deleted
4
Press ADJ. lever.
• Press the ADJ. lever again to return to the screen for deleting
one file at a time.
5
Press the !"#$ buttons to
select the starting point of
the range of files you want
to delete and press the D
button.
• The trash symbol is displayed in
the upper left corner of the file.
6
Press the !"#$ buttons to
select the ending point of
the range of files you want
to delete and press the D
button.
• The trash symbol is displayed in
the upper left corner of the
specified files.
7
Repeat Steps 5 and 6 to specify all the ranges of
files you want to delete.
• If you selected a file by mistake, you can deselect it by pressing
the ADJ. lever to return to the screen for deleting one file at a
time, selecting the file, and pressing the D button.
8
Press the MENU/OK button.
9
Press the#$ buttons to select [Yes] and then press
the MENU/OK button.
• The display indicates that the files are being deleted; once
finished, it returns to the thumbnail display screen.
Delete
BackEnd
2
/
6
Delete
Switch SelStart
5
/
6
To Next Page
Loading...
