2
Playback Functions
108
Developing RAW Images
You can convert RAW images into JPEG format and then save them as new
files. The white balance and effect can be configured before saving the files.
1 Display a RAW image in playback mode, and then press the
MENU/OK button.
The [Playback] menu appears.
2 Select [RAW Development], and then press the $ button.
The [RAW Development] screen appears.
3 Press the !" buttons to select a
parameter, and then press the $
button.
The following settings are available.
• Picture Size • Color Moire Correction
• White Balance • Aspect Ratio
• Brightness Compensation • Noise Reduction
• Effect • Color Space Setting
• Image Settings • Ambient Brightness
• Dynamic Range Compensation
The settings that were set at the time of shooting are initially selected.
4 Press the !" buttons to select a setting, and then press the #
button.
With [White Balance], you can perform white balance compensation by
pressing the $ button.
With [Effect] and [Image Settings], you can set the detailed settings by press-
ing the $ button.
5 When you have finished configuring all of the settings, press the
MENU/OK button.
A new JPEG image is saved.
To Next Page
Loading...
