Ricoh GR II - Changing the File Name; Selecting the Folder Name

3
Changing Camera Settings
127
Selecting the Folder Name
You can select the folder name in [Folder Name Setting] of the [Setup] menu.
Serial Number 100 to 999
Shooting Date ***_MMDD (3-digit folder number_Date)
Changing the File Name
You can change the first two characters of file names from “R0”.
1 Select [Change File Name] in the [Setup] menu, and then press
the $ button.
The [Change File Name] screen appears.
2 Press the !" buttons to select a
character.
Only uppercase alphanumeric characters can
be entered.
3 Press the $ button, and then select the second character in the
same way.
4 Press the MENU/OK button.
The file name is registered, and then the [Setup] menu reappears.
Note -----------------------------------------------------------------------------------------------------------
• When [Color Space Setting] of the [Setup] menu is set to [AdobeRGB], “_” (underscore) is added as the
first character of file name and only the one character after “_” can be changed.