Ricoh GR II - Page 123

3
Changing Camera Settings
121
1 Select [ADJ. Lever Setting] in the [Key Custom Options] menu,
and then press the $ button.
The [ADJ. Lever Setting] screen appears.
2 Press the !" buttons to select any of [ADJ. Lever Setting 1] to
[ADJ. Lever Setting 5], and then press the $ button.
3 Press the !" buttons to select the
function to register, and then press
the # button.
Repeat Steps 2 and 3.
4 Press the MENU/OK button.
The [Key Custom Options] menu reappears.
Using ADJ. Mode
1 Press the ADJ. lever in shooting mode.
The mode switches to ADJ. mode.
2 Press the #$ buttons to select the
function to set.
The setting switches between ADJ. Lever Set-
ting 1 to ADJ. Lever Setting 5.
3 Press the !" buttons to select a value.
4 Press the MENU/OK button.
The selected function is set.
Note -----------------------------------------------------------------------------------------------------------
• When [Shutter Button Confirmation] of the [Key Custom Options] menu is set to [On], the ADJ. mode
setting can be set by pressing the shutter release button halfway.