37
First Steps
When tilted too far or unable
to measure tilt
Red
When tilted forward
Yellow
Note -----------------------------------------------------------------------------------------------------------
• The indicators are displayed only when [Level Indicator] is set to [On] in [DISP. Button Display Setting]
of the [Setup] menu. (p.125)
• The indicators can also be set in [Level Setting] of the [Setup] menu. You can use [Level (Tilt) Calibra-
tion] of the [Setup] menu to set the current camera tilt as the reference setting.
Caution -------------------------------------------------------------------------------------------------------
• The level indicator does not operate when the camera is upside down, movies are being recorded, or
during interval shooting.
• The level function becomes less accurate when the camera is moving or when shooting in an environ-
ment subject to movement, such as in a vehicle.
• Use this function as reference to see if images are level when shooting. The accuracy cannot be guar-
anteed when using the camera as a level.
To Next Page
Loading...
