1
65
Various Shooting Functions
Caution -------------------------------------------------------------------------------------------------------
• [FA/Move Target] cannot be set in the following cases.
• In 5 and 3 modes
• When the focus is set to [Subj. Tracking]
• When [Magnification Setting] is set to [Magnify whole], [One Press M Mode] is not available.
Note -----------------------------------------------------------------------------------------------------------
• If [Focus] is changed to [Subj. Tracking], the target position is reset.
• In the [Key Custom Options] menu, [FA/Move Target] can be registered to use to the Fn1, Fn2, and
Effect buttons. (p.122)
[FA/Move Target] is registered to the Fn1 button as the default setting.
To Next Page
Loading...
