1
87
Various Shooting Functions
Shooting with Miniaturize
Images that give the impression that they are close-ups of a miniature can
be taken. This mode is effective when shooting from a high vantage point
while looking down at a diagonal angle.
1 In [Effect] of the [Shooting] menu, select [Miniaturize].
To change settings such as [Toning Effect], press the Fn2 button.
2 Press the MENU/OK button.
The miniaturize shooting screen appears.
The areas outside of the unblurred (focus area) are shown in a semi-trans-
parent gray.
3 Press the Fn2 button.
The screen for setting the position and range of blurring appears.
4 Press the !" buttons to move the
position of the focus area.
Change the vertical/horizontal orientation
of the focus area by pressing the Fn2 button
while this screen is displayed.
5 Press the #$ buttons to set the width of the focus area.
6 Press the MENU/OK button.
The shooting screen reappears.
Note -----------------------------------------------------------------------------------------------------------
• The amount of blurring in the image shown on the confirmation screen immediately after shooting
differs slightly from that of the actual image.
To Next Page
Loading...
