6. While pressing the release lever, adjust the side and end fences to the paper size.
Do not leave spaces between the paper and fences.
To fix the end fence, engage the two projections of the stopper with the holes on the end fence,
and then tighten the fixing screw by rotating it 90 degrees clockwise with a coin or similar object.
• If you will not fix the end fence, put the stopper in the position as shown in the illustration, and
then rotate the fixing screw 90 degrees clockwise with a coin or similar object.
7. Push the tray in the original position carefully.
To return the completely pulled out tray to the original position, push the tray straight in. If the paper
tray is damaged, it may cause a paper jam. Also, if you push the tray forcibly, the side fence of the
tray may be moved.
Loading Paper into the Paper Tray
183
To Next Page
Loading...
