Ricoh IM C6000 Series - Messages Displayed When There Is a Problem with the Certificate

Messages Displayed When There Is a Problem with the Certificate
Message Cause Solution and reference
"The destination cannot
be selected because the
device certificate used
for the S/MIME
signature is not currently
valid."
The device certificate
used for the S/MIME
signature is not currently
valid.
Install a new device certificate used for the S/
MIME signature.
See "Encrypting Network Communication",
User Guide (Full Version).
"Signature cannot be set
because there is a
problem with the Digital
Signature's device
certificate. Check the
device certificate."
"Signature cannot be set
because the Digital
Signature's device
certificate is not currently
valid."
The device certificate
used for the digital
signature in PDF or
PDF/A is not currently
valid.
Use a valid device certificate for the digital
signature in PDF or PDF/A.
See "Scanning an Original as a PDF with
Security Setting Specified", User Guide (Full
Version).
"The destination cannot
be selected because
there is a problem with
the device certificate
used for the S/MIME
signature. Check the
device certificate."
The device certificate
used for the digital
signature in PDF or
PDF/A is missing or
invalid.
9. Troubleshooting
294