*1
Adjust the supporting side fence before loading B4 JIS , A3 , SRA3 , 11 × 17 , or 12 × 18 paper.
*2
There are lines to indicate these paper sizes on the labels attached to the lower paper trays, however there is
no size description for these paper sizes.
*3
When loading paper with a vertical length of more than 304.8 mm (12.0 inches) in Trays 2–4, use paper
that has a horizontal width of 450 mm (17.8 inches) or less.
*4
Set the supporting side fence position to SRA3 before loading paper with a vertical length of 297 mm or
longer and a horizontal length of over 335 mm.
Bypass Tray
Paper type and weight Paper size Paper capacity
52–300 g/m
2
(14 lb. Bond–
110 lb. Cover)
Thin Paper–Thick Paper 4
Paper sizes that can be
detected automatically:
A3 , A4 , A5 , A6 ,
B4 JIS , B5 JIS , B6 JIS ,
SRA3
A5 , B5 JIS , 11 × 17 ,
8
1
/
2
× 11 , 5
1
/
2
× 8
1
/
2
, 12 × 18 , SRA3
• 100 sheets (up to 10 mm
in height)
• Thick Paper 1: 40 sheets
• Thick Paper 2–Thick Paper
3: 20 sheets
• Thick Paper 4: 16 sheets
8. Adding Paper and Toner
198
To Next Page
Loading...
