Paper Type Note
Setting translucent paper • When loading translucent paper, always use long
grain paper.
• Remove copied or printed sheets one by one.
Setting coated paper • Specify "Paper Type" to [Coated: Matte] and an
appropriate item for "Paper Thickness" in paper type
setting for each tray under [Tray Paper Settings].
• To print on high-gloss coated paper, specify "Paper
Type" to [Coated: Glossy] in paper type setting for
each tray under [Tray Paper Settings].
• If a paper jam occurs or if the machine makes a
strange noise, feed the coated paper from the bypass
tray one sheet at a time.
Paper Thickness for Each Paper Weight
Paper Thickness Paper weight
Thin Paper 52–59 g/m
2
(14–15 lb. Bond)
Plain Paper 1 60–74 g/m
2
(16–20 lb. Bond)
Plain Paper 2 75–81 g/m
2
(20 lb. Bond)
Middle Thick 82–105 g/m
2
(20–28 lb. Bond)
Thick Paper 1 106–169 g/m
2
(28 lb. Bond–90 lb. Index)
Thick Paper 2 170–220 g/m
2
(65–80 lb. Cover)
Thick Paper 3 221–256 g/m
2
(80 lb. Cover–140 lb. Index)
Thick Paper 4 257–300 g/m
2
(140 lb. Index–110 lb. Cover)
Unusable Paper
• Do not use stapled sheets of paper, aluminum foil, carbon paper, or any kind of conductive
paper. Doing so can result in fire.
8. Adding Paper and Toner
202
To Next Page
Loading...
