Replacing the Waste Toner Bottle
The waste toner bottle needs to be replaced soon when the "Waste Toner Bottle is almost full." message
is displayed. Prepare a replacement waste toner bottle.
See "Contact Information", User Guide (Full Version).
See the video displayed on the control panel of the machine for the procedure to replace the waste
toner bottle.
1. Press [Watch Video].
To display this screen again, press [Confirm] in the system message widget or press [Check Status]
and then press [Check] under "Mach. Status" on the [Mach./Applic. Stat] tab.
2. Press the play key.
3. Replace the waste toner bottle by following the procedure shown in the video.
Precautions When Replacing the Waste Toner Bottle
• Do not store toner (new or used) or toner containers while toner is inside in a place with an open
flame. The toner can ignite and result in burns or fire.
8. Adding Paper and Toner
220
To Next Page
Loading...
