1. Open the bypass tray.
When loading paper larger than the bypass tray (longer than A4 paper in landscape orientation),
pull out the extender.
2. Load the paper with the print side down, and push it in lightly until you hear a beep.
Fan sheets before loading so that multiple sheets of paper do not stick to each other and are not
fed at once.
When loading envelopes, postcards, or letterhead paper, confirm the orientation, face and back,
or location of flaps.
• page 206 "Envelope Orientation and Recommended Status"
• page 209 "Loading Orientation-fixed Paper or Two-sided Paper"
3. Align the paper guides to the paper size.
• To load paper on the bypass tray, it is better to orient it in the direction of .
Loading paper into the banner paper guide tray
1. Turn the knob clockwise until its triangle mark stops at the unlock mark.
Be careful that your hand does not hit the banner paper guide tray when turning the knob.
If you cannot turn the knob, turn it while pushing the banner paper guide tray toward the
machine.
Loading Paper into the Paper Tray
185
To Next Page
Loading...
