• Selecting other than [Preview]
• Specifying [PDF File Type: PDF/A Fixed] under [System Settings] to [Off]
Scan to Folder
Item Specifications
Scanning resolution 100 dpi, 200 dpi, 300 dpi, 400 dpi, 600 dpi
Protocol SMB, FTP
• You can use SMB protocol (139/TCP, 137/UDP) or CIFS
protocol (445/TCP) for sending folders with SMB.
• The Scan to Folder function with SMB protocol (139/TCP, 137/
UDP) is enabled under NetBIOS over TCP/IP environment only.
• You cannot use the Scan to Folder function with SMB under
NetBEUI.
Output format TIFF, JPEG, PDF, High Compression PDF, PDF/A, Searchable PDF
*1
*1
The number of characters that can be scanned optically is about 40,000 characters per page.
• When you select [PDF], [High Compression PDF], or [PDF/A] for the file format, you can attach a
digital signature. You can also specify the security settings for [PDF] or [High Compression PDF].
• See "Scanning an Original as a PDF with Security Setting Specified", User Guide (Full Version).
• To specify High Compression PDF for the PDF type, the following settings are required:
• Selecting Gray Scale or Full Color for [Original Type] under [Transmission Settings]
• Selecting other than [Reduce / Enlarge] under [Transmission Settings]
• Selecting [200 dpi], [300 dpi], [400 dpi], or [600 dpi] for [Resolution] under [Transmission
Settings]
• Selecting other than [Preview]
• Specifying [PDF File Type: PDF/A Fixed] under [System Settings] to [Off]
Network TWAIN Scanner
Item Specifications
Scanning resolution 100–1,200 dpi
*1
Protocol TCP/IP
List of Specifications
333
To Next Page
Loading...
