Setting SUB Codes for Transmission
101
2
D Select [On] using {U} or {T}, and then press the {OK} key.
The screen returns to that of step
C
.
E Press the {Escape} key.
The standby screen returns.
F Enter the fax number of a destination or an IP-Fax destination.
G Press the User Function key ({F1} to {F3}) programmed with [SUB/SEP Code].
H Enter a SUB Code, and then press the {OK} key.
If you make a mistake, press the {Clear/Stop} key before pressing the {OK}
key, and then try again.
ASO029S
To Next Page
Loading...
