Checking the Transmission Result (TX File Status)
133
4
Checking the Transmission Result (TX File
Status)
You can confirm transmission by the display, report, or e-mail.
Confirming on Display
Follow these steps to display the transmission results.
A Press the {Job Information} key.
B Select [TX File Status] using {U} or {T}, and then press the {OK} key.
C Check the transmission results using {U} or {T}.
When a fax is sent, the Own Fax Number or Own Name information of the
receiver appears. When an Internet Fax is sent, the e-mail address you entered
or the name programmed in the machine's destination list appears. For a
transmission from a computer, “-- LAN-Fax -->” is shown.
D Press the {Escape} key twice.
The standby display appears.
ASO036S
To Next Page
Loading...
